DRB-0030: KIT DRB: SIN BLOQUEO CON ARANDELAS
DRB-0030: KIT DRB: SIN BLOQUEO CON ARANDELAS
No se pudo cargar la disponibilidad de retiro
Compartir
WHY BUY YOUR NON-LOCKING DRAWBAR FROM CNCPROS
Fadal Non-Locking Drawbar Assembly Kit (DRB-0030)
CNCPros is the premier supplier of precision-engineered replacement parts for Fadal CNC Machines. The DRB-0030 is a comprehensive OEM solution designed to restore the drawbar sub-assembly to a state of superior durability and performance. This kit is critical for the spindle's tool retention system, ensuring a secure and reliable clamp on the tool holder under high-stress machining conditions.
Advanced Engineering and Component Durability
Each individual part in this kit is meticulously engineered with enhanced design characteristics to provide superior longevity and consistent performance. The kit is composed of:
- DRB-0028 Non-Locking Drawbar Shaft: This shaft serves as the primary mechanical actuator. Its design is optimized for exceptional fatigue resistance, ensuring reliable operation over an extended service life. The precise surface finish and dimensional tolerances are critical for a consistent clamp-and-release cycle, preventing tool pull-out and maximizing tool life.
- DRB-0004 Floater: The floater's design is critical for maintaining alignment and stability within the drawbar assembly. Its precision fit ensures smooth and predictable motion, which is essential for reducing wear on surrounding components.
- DRB-0019 Retainers: These retainers are designed to securely hold the chrome balls in their correct positions. Their robust construction prevents deformation, ensuring the reliable distribution of drawbar force and the integrity of the clamping mechanism.
- BRG-0005 Precision Chrome Balls (10-pack): These are not standard balls; they are precision-ground, high-hardness chrome spheres. Their exceptional dimensional consistency and wear resistance are vital for distributing the clamping force uniformly and ensuring the smooth, friction-free actuation of the drawbar mechanism for thousands of cycles.
- HDW-0195 Bellville Washers & Grease: The included Bellville washers form a high-performance spring stack. Engineered for a consistent spring rate and fatigue life, these washers are the key to generating and sustaining the high clamping force required to secure the tool holder. The included high-performance grease further enhances the longevity of the entire assembly by minimizing friction and wear.
The CNCPros Premier Advantage
Choosing CNCPros for your DRB-0030 is a strategic decision to maintain the precision and longevity of your Fadal machine. We are your premier OEM supplier, providing an uncompromised solution.
- Genuine OEM Quality: Every component in this kit is an OEM-grade replacement, guaranteeing that all parts work together seamlessly to meet the stringent standards of Fadal engineering.
- Expert Support and Experience: Our decades of experience in the CNC machining industry allow us to provide expert guidance on installation and troubleshooting, ensuring the optimal performance of your drawbar assembly.
- 1 Year Warranty: This kit is backed by a 1 Year warranty that covers defects in material and workmanship, providing assurance in the quality and reliability of your investment.
Unmatched Availability: We maintain a comprehensive inventory of Fadal drawbar and spindle parts, ensuring the components you need are always available to minimize downtime and keep your operations running smoothly.
Belleveille Spring Calculation
How many springs should I put back into my drawbar?
Follow this link for Fadal Engineerings Technical advise:
Spring Calculations
Otherwise, a good rule of thumb is to have one spring peaking over the top of the spidle shaft and that is about as good as any farmer could get it. Your drawforce for a non-locking drawbar (DRB-0030) is about 600 - 700 lbs. For a locking drawbar (DRB-0003) you should see something around 1400 lbs or so. Factory spec is 1800 lbs but I rarely see that in older spindles.
Give us a call if you have any questions with the installation. 208-888-9236
HOW IMPORTANT IS THIS POWER SUPPLY AND WHY BUY FROM CNCPROS
Technical Overview: The ELE-1071 (MFS-044) Low-Voltage Power Supply
In the complex electronic architecture of your Fadal CNC, the ELE-1071 (MFS-044) is the foundational source of life. While the main spindle and axis drives handle the heavy mechanical lifting, the ELE-1071 is the precision regulator that powers the "logic" of your machine. It converts raw AC input into the highly stable ±12VDC and +5VDC signals required by your control boards, sensors, and input devices.
Critical Operational Roles
The ELE-1071 does not simply "provide power"; it sustains the integrity of the machine's entire digital brain:
- Logic Voltage (+5VDC): This is the heart of your motherboard, CPU, and memory. Digital TTL (Transistor-Transistor Logic) circuits are extremely sensitive; a fluctuation in this rail will cause CPU "hangs," parity errors, or corrupted data registers during CNC program execution.
- Analog & Communication Rails (±12VDC): These rails are essential for your communication boards, analog-to-digital converters, and signal conditioning for sensors. The ±12V provides the headroom required for precise signal processing. If the -12V rail droops, your analog sensors will lose their reference, leading to "ghost" faults and erratic input readings.
The Importance of "Tight-Tolerance" Stability
In a CNC control environment, a power supply is not judged by its ability to simply stay "on," but by its ripple rejection and load regulation.
- Voltage Ripple: If your power supply is aging, it introduces high-frequency "ripple" (AC noise) onto your DC rails. This noise acts as "static" on the data lines, which can lead to intermittent communication timeouts between your CPU and Axis Controller cards—the classic cause of "Axis Faults" that seem to disappear when you restart the machine.
- Load Regulation: Your machine’s power draw fluctuates as it energizes relays, activates sensors, and processes complex G-code. A high-quality supply like the ELE-1071 must maintain steady voltage even when the system load spikes. If the voltage drops under load, the digital components may experience "brownouts," resulting in unpredictable machine behavior.
The CNCPros International Advantage: Engineered for Overhead
At CNCPros International, we recognize that the original power supply specifications were designed for a static environment. Over the years, your machine’s expansion cards and auxiliary devices may have increased the load on this supply.
That is why our ELE-1071 replacement is intentionally over-rated for the application. * Thermal Headroom: Our units are built with higher-capacity capacitors and cooling designs, meaning they operate well below their maximum thermal limit. This prevents the "heat-soak" failures that plague standard-duty power supplies, ensuring the unit lasts years longer in the harsh, dusty, and high-heat environment of a machine shop.
- Transient Suppression: Our supplies include superior transient voltage surge suppression (TVSS) to protect your sensitive motherboard logic from the "noise" generated by your spindle drive and coolant pumps.
The CNCPros Promise
When you purchase the ELE-1071 from CNCPros International, you are receiving a component designed to meet the rigorous standards of Fadal engineering, backed by nearly three decades of direct technical experience.
- Fadal-Direct Expertise: We don't just sell the box; we understand what it powers. We can help you identify if your current "random" control errors are caused by a sagging voltage rail or a failing backplane connection.
- One-Year Warranty: We stand behind the stability of our power supplies with a full, one-year warranty.
- Preventative Maintenance Guidance: We include our proprietary installation guide, which provides the technical tips necessary to verify your voltage rails under load, ensuring your machine is running at peak performance.
Is your Fadal control exhibiting "random" communication errors or intermittent faults? Don't guess with your control logic. Reach out to our expert Order Desk at 1-208-888-9236. Let us help you verify your voltage rails and determine if an ELE-1071 upgrade will restore the stability of your Fadal CNC control.